Door Lock Change In Dubai

What You’ll Need for a Door Lock Change in Dubai

Before starting any home project, it’s essential to gather all necessary materials. Changing a door lock is straightforward, and you likely already have some of the required tools. Here’s what you’ll need:

1. New Locks

Purchase a new lock for every door you want to change the key for. A standard deadbolt kit typically includes everything needed for installation, including mounting hardware and the inside turner. For the best fit, try to buy a lock from the same make, model, and manufacturer as the one you’re replacing.

2. Measuring Tape

Measure your door before heading to the hardware store. While most deadbolts can be replaced, ensuring you have the correct dimensions is crucial. Here’s a quick guide on measuring door locks.

3. Screwdriver

Check your toolbox to see if you need a flathead or Phillips screwdriver. You may need both types to assemble your new deadbolt kit.

Method 1: How to Replace a Door Lock Without an Experienced Locksmith

Step 1: Measure the Door Lock Size

Measure the door to determine the size of the new lock. Most new doors already have holes for locks, but ensure the hole is compatible with your new lock to avoid making additional holes.

Step 2: Find a Compatible Lock

Door locks come in various sizes, so you’ll need to measure your current lock. Buying the same brand usually guarantees size compatibility. Check our list of recommended door locks for more ideas.

Step 3: Insert the New Bolt

Install the new bolt and secure it with the supplied screws. Place the bolt from the outside edge of the door and attach the mounting plate using the included screws.

Step 4: Connect Interior and Exterior Plates

Join the interior and exterior plates using the long screws provided with the lock. Ensure the lock cylinder fits snugly into the deadbolt before tightening.

Step 5: Attach the Decorative Base Plate

If your lock includes a decorative base plate, install it after securing the lock to ensure proper function.

Method 2: How to Rekey a Door Lock

Step 1: Purchase a Rekeying Kit

Buy a rekeying kit compatible with your lock brand. These kits come with all the necessary tools for changing the key. Make sure to read the instructions for any brand-specific details.

Step 2: Remove the Outside Door Knob

Use the included wire tool to remove the knobs. Insert your key and turn it to unlock the door, then use the wire tool in the side hole to release the knob.

Step 3: Remove the Cylinder

After detaching the front of the lock, check for any plastic or metal sheets holding the lock cylinder in place. Slide them out, then press the key down to pop the lock cylinder out.

Step 4: Remove the Retainer Ring

Use the wrench tool from your kit to remove the retainer ring that holds the cylinder housing in place.

Step 5: Extract the Plug

Use the cylinder follower to push the plug out of the housing while maintaining pressure to prevent pins from scattering.

Step 6: Remove Old Pins

Follow the kit’s instructions to extract the old pins from the cylinder plug.

Step 7: Install New Pins

Match the new pins to the provided code in the kit and insert them into the plug using tweezers, ensuring they sit flush with the surface.

Step 8: Reassemble the Lock

Reinsert the plug into the cylinder, reattach the retainer ring, and put the cylinder back into the doorknob.

Method 3: How to Replace a Door Knob and Deadbolt Lock

Tools Needed

For this task, you’ll need a Phillips screwdriver, a drill, a deadbolt, and a doorknob.

Step 1: Remove the Old Lock

Use a Phillips screwdriver to remove the screws holding the door handles and deadbolt. There are typically four screws to remove.

Step 2: Install the New Lock

Once the old lock is removed, insert the new lock using the screws provided. Ensure the new set fits properly in the door frame.

Step 3: Installing a New Deadbolt

If your front door doesn’t have a deadbolt and you wish to add one, position it correctly and secure it with the same screws used for the previous lock.

Step 4: Position the Front Doorknob

Attach the front doorknob using the longer screws from the set. Test the lock functionality before proceeding.

Step 5: Secure the Lock Components

Attach the lock’s interior pieces using the shorter screws, then test the door to ensure it opens and closes smoothly.

Step 6: Finalize the Installation

Make sure all components are securely attached and test the lock one last time to confirm everything is in working order.

Conclusion

There are many reasons to change your door locks. It’s important to do so immediately when moving into a new home, as you can’t be sure who else has copies of the keys. If you’re renting, ask your landlord if the locks have been changed. Additionally, consider changing the locks if you have a new roommate or have recently experienced a breakup.